Tag Archives: flue

Add To Saved Sellers. FLUE PIPE DAMPER – to fit 4 / 100mm dia Vitreous and Single Wall Flue Pipes. 4″ Cast Iron Flue Damper to fit inside 4″ / 100mm vitreous and single wall pipes (see separate listing in shop for 4″, 5″, 6″, & 7″) This is an inline damper, for fitting into vitreous enameled flue pipe. What is a Flue Damper A flue damper is a cast iron plate with a spindle that you fit inside your first piece of flue pipe that connects to your cast iron multifuel or woodburning stove. It works as a butterfly valve. The more air that goes in a stove, and the more draw through the flue – the hotter it burns. A damper allows you to reduce the draw through the stove and therefore reduce the heat output. It is not essential unless you wish to be able to achieve an overnight burn, but most people do find it a very worthwhile feature. How To Fit a Flue Damper Prior to installing a damper, ensure that it’s location will allow it to spin freely once installed. Ensure that the damper will be in a convenient location without obstruction from the top of the stove or cleaning access doors in the fireway for example. During installation, safety goggles / glasses should be worn at all times. The following steps should ensure a simple installation : 1. Remove spindle from the main body. This is sometimes not as easy as it would appear, as the spring needs sufficient pressure exerted to enable satisfactory working when installed. A good method is to hold the damper by the main body with the pointed end of the spindle facing upwards, then carefully apply pressure downwards onto a scrap piece of wood or similar. When the main body is lowered down the shaft, twist the spindle to release the two main parts. When free and decision has been made as to the location of the damper, a 6mm (1/4 approx) hole must be drilled at opposite parameters of the flue pipe. Drill very carefully as a snug fit is best. Extreme care should be exercised when drilling – especially into vitreous enameled flue pipe. Once the holes are drilled, the main body of the damper needs careful sliding into the flue pipe to the location of the holes. Whilst in situ, slide the centre of the spindle through the main body of damper, twisting where necessary to refit in it’s original location through the main body. Prior to installing the flue pipe with damper fitted, check that when the handle is horizontal, the damper also is (damper closed) and when vertical, that the damper also is (damper open) Help and advice regarding flue pipes, liner, accessories and fittings available. We pride ourselves in our product knowledge, fast dispatch time and extensive stocks. Items must arrive back in new, resalable condition to the address below within 14 days. It is your responsibility to obtain a certificate of posting for the return from the post office, otherwise you may not be able to claim the post office for it should it not arrive. The item “4 100mm Cast Iron Flue Pipe Damper Wood Burner Burning Stoves Fire Heat Control” is in sale since Tuesday, April 24, 2012. This item is in the category “Home, Furniture & DIY\Fireplaces & Accessories\Heating Stoves”. The seller is “naturalheating” and is located in Attleborough, Norfolk. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Japan, New Zealand, Israel, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Thailand, Bangladesh, Bermuda, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Liechtenstein, Sri lanka, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion.

• Type: Wood Burning Stoves
• Brand: Natural Heating
• MPN: damp4